Reply to thread

Message

<blockquote data-quote="Trust" data-source="post: 970305" data-attributes="member: 181524">Dont be angry , but today by the lack of more data for the Lami , I made a CM changer with the Parabola calculations&nbsp; maybe&nbsp; [USER=290419]@WHATAGOAL1[/USER] wants it .R@Rimants an I&nbsp; used that parabola&nbsp; data after we first set up the 1.8 CM with the original feedarms .At channel 12.637 H at 4.8º E the signal increaced from 9.9 to 10.8 dB&nbsp; .At channel 11.766 H at 4.8º E the signal increaced from 13.9 to 14.9 dB .With that data for the AS-1800 , the spot on the vertical bar frontside the dish is at 730 mm from the bottom!!!Not sure the same will happen wit that Lami , I wish I had such dish here to test . As you can see , the sidearms must be extended with 200 mm long M6 inox rod .I decided to use the TechniRotor pole clamp to attach the mainbeam onder the dish .Its very stable and at that way more easy to lift or lower the beam wenn neccecary .[ATTACH=full]92940[/ATTACH]</blockquote>

[QUOTE="Trust, post: 970305, member: 181524"] Dont be angry , but today by the lack of more data for the Lami , I made a CM changer with the Parabola calculations maybe [USER=290419]@WHATAGOAL1[/USER] wants it . R@Rimants an I used that parabola data after we first set up the 1.8 CM with the original feedarms . At channel 12.637 H at 4.8º E the signal increaced from 9.9 to 10.8 dB . At channel 11.766 H at 4.8º E the signal increaced from 13.9 to 14.9 dB . With that data for the AS-1800 , the spot on the vertical bar frontside the dish is at 730 mm from the bottom!!! Not sure the same will happen wit that Lami , I wish I had such dish here to test . As you can see , the sidearms must be extended with 200 mm long M6 inox rod . I decided to use the TechniRotor pole clamp to attach the mainbeam onder the dish . Its very stable and at that way more easy to lift or lower the beam wenn neccecary . [ATTACH=full]92940[/ATTACH] [/QUOTE]

Verification