Reply to thread

Message: <blockquote data-quote="rolfw" data-source="post: 24682" data-attributes="member: 175057">The first thing I would check is whether you are getting a voltage at the LNB end of the cable BP, you can test this with a volt meter or a light bulb (12v) or bigger. I can't remember whether the MSS300 has a signal strength meter, but if it has, try putting your hand on the and of the LNb, or pointing at the sunlit ground and see if the strength increases, if it does, then the LNb is probably working.LNBs are pretty cheap, so even if you need to replace it, it won't cost the earth.</blockquote>