Reply to thread

Message

<blockquote data-quote="slugboy" data-source="post: 717238" data-attributes="member: 360619">hi allI think I grasp the idea of a single satellite, with quatro lnb and multiswitch leading to the receivers.&nbsp; My problem is the settings on the receiver (I think).&nbsp; I am getting a 'no signal' found problem when connecting it all up.&nbsp; The satellite position is ok, because I set it up initially using a single lnb straight to the reciever - works fine.&nbsp; Do I need to manually set any settings on the receiver to make it happen (currently set to 'universal lnb' with the following settings:lnb low freq 9750lnb high freq 10600my multiswitch has the following:lncA 18v/22khzlncB 13v/22khzlncC 18v/0khzlncD 13v/0khzI have tried every combination from the quatro lnb which has the following settings:VHVLHHHLAnyone know what I'm doing wrong?I have tried every cable in every combination on the multiswitch just in case I mixed them up.Thanks in advanceTony</blockquote>

[QUOTE="slugboy, post: 717238, member: 360619"] hi all I think I grasp the idea of a single satellite, with quatro lnb and multiswitch leading to the receivers. My problem is the settings on the receiver (I think). I am getting a 'no signal' found problem when connecting it all up. The satellite position is ok, because I set it up initially using a single lnb straight to the reciever - works fine. Do I need to manually set any settings on the receiver to make it happen (currently set to 'universal lnb' with the following settings: lnb low freq 9750 lnb high freq 10600 my multiswitch has the following: lncA 18v/22khz lncB 13v/22khz lncC 18v/0khz lncD 13v/0khz I have tried every combination from the quatro lnb which has the following settings: VH VL HH HL Anyone know what I'm doing wrong? I have tried every cable in every combination on the multiswitch just in case I mixed them up. Thanks in advance Tony [/QUOTE]

Verification