No signs of digiturk channels with programmed OPOS 1.05 !!!

[jpmm]

Hi,

I tried to program the opos 1.05 card with cas3. Here are the steps I followed:

1- opened studio6.6
2- Inserted card, with the chip facing down, into top slot
3- message displayed:

"keys removed

4- loaded files (3):

cryptkey file: OPOS_Cryptoworks_CryptKey
eeprom file: OPOS_Cryptoworks_CryptApp.eep
flash file: OPOS_Cryptoworks_CryptApp

5 - selected "write" button
6- message displayed "erasing...writing flash..."
7- message displayed "programming succeffully"
8 - Selected "exit" button
9 - In previous menu selected "utilities->phoenix->smartmouse 3.579 Mhz->hide"
10 - In the directory of the opos loader, with the dat file within the same directory as the loader I clicked the loader file:

OposCwUpdate (loader file -MFC Application)
OposCwUpdate (Latest DAT file)

11 - Selected "COM1" in small window visibled
12 - Pressed "OK"
13 - Message displayed "Updated"

14 - Inserted the card into the cryptoworks cam (by SCM mycrosystems) and the cam into the receiver's (mirage900sci) slot.

Finally I selected channels from digiturk package but could not open any of those channels.

I got the message:

"Cannot view the service on these channels - Cryptoworks v4.00.008 "

Any sugestions on what am I doing wrong?

The ATR now when I insert the card and select "ATR" button is:

keys removed

Thanks :-Cbigsmil

 

[Analoguesat]

DO NOT posts keys of ANY SORT on this forum. Next time you get thrown off.

 

[Burnham Beech]

The Opos card does not work in all Cryptoworks cams.

Try the five°e file and see if that works.

 

[Burnham Beech]

jpmm

You sent me a PM with the message "which file were you referring to when you mentioned the five°e file"

The file I am refering to is Kingston/Arqiva file for Sirius at five degrees East - you can find it on the opos site.

It's only a suggestion to see if an alternative file works - I suspect your cam is the problem.