Reply to thread

Message: <blockquote data-quote="Vipersan" data-source="post: 628214" data-attributes="member: 325666">..Thanks Robbo ...but not convinced in my own mind that moving the dish slightly arround the stub to compensate ..would work if the error was too great ..Certainly it wouldn't matter for sats within the centre of the arc ..but Im sure it would throw a big spanner in the works at the extremes ..say 40 degrees to 60 either East an west .on one side it would cause the dish to dip to low ..and on the other ..too high ....and of course this would be made worse by a larger dish being mounted ..as the beam width is tighter..maybe ..its just me ..but I can 'imagine' the errors ..particularly as I tried evey which way for a month to align it ..and couldn't fathom why it was happening..I can now ....now that I've seen the bracket.rgdsVS</blockquote>