Reply to thread

Message

<blockquote data-quote="Vipersan" data-source="post: 628787" data-attributes="member: 325666">... I also took a long hard look at an alloy 1.2 m dish made by 'FaVal' ?anyone had any experience with them ?certainly the weight is good ...but Im not sure mounting this at height on 18&quot; brackets would provide enough clearance to the wall at the E &amp; W extremes....then theres wind loading to consider..here is the spec :-Technical Specifications 125cm Alloy Offset Dish AZ-EL Fitting: 50mm - 60mm for Mounting on Pole/Mast, Wall Mount or DiSEqC 1.2/USALS Motor Offset angle: 23° Focal length: 842mm Overall diameter: 1345 x 1240mm Reflector diameter: 1275mm x 1170mm Reflector degree 23° Gain (10,7GHz) 40,9dB Gain (11,7GHz) 41,7dB Gain (12,7GHz) 42,4dB Elevation: 0°/90° Beamwidth (-3d<img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite6" alt=":cool:" title="Cool&nbsp; &nbsp; :cool:" loading="lazy" data-shortname=":cool:" /> @ 12,75GHz Reflector/Dish Weight: 4.9kg Assembled Weight: 9.5Kg</blockquote>

[QUOTE="Vipersan, post: 628787, member: 325666"] ... I also took a long hard look at an alloy 1.2 m dish made by 'FaVal' ? anyone had any experience with them ? certainly the weight is good ...but Im not sure mounting this at height on 18" brackets would provide enough clearance to the wall at the E & W extremes.. ..then theres wind loading to consider.. here is the spec :- Technical Specifications 125cm Alloy Offset Dish AZ-EL Fitting: 50mm - 60mm for Mounting on Pole/Mast, Wall Mount or DiSEqC 1.2/USALS Motor Offset angle: 23° Focal length: 842mm Overall diameter: 1345 x 1240mm Reflector diameter: 1275mm x 1170mm Reflector degree 23° Gain (10,7GHz) 40,9dB Gain (11,7GHz) 41,7dB Gain (12,7GHz) 42,4dB Elevation: 0°/90° Beamwidth (-3dB) @ 12,75GHz Reflector/Dish Weight: 4.9kg Assembled Weight: 9.5Kg [/QUOTE]

Verification