Reply to thread

Message

<blockquote data-quote="el bandido" data-source="post: 1030814" data-attributes="member: 316102">The new software seems to have changed the way Diseqc 1.2 positions are stored. Each diseqc 1.2 position has to be stored as shown in the screencap. Position 1 will be stored first, Position 2 will be stored second. Position 3 will be stored third...ETC.It does not matter what number the satellite is in the satellite list. the first diseqc 1.2 position stored will be Diseqc position 1. It is important to save each diseqc position as shown in the screencap. (See link. Cannot attach.)If you change a satellite's motor control to None after assigning a diseqc 1.2 position to that satellite, then whatever position number that satellite had will be deleted and reused by the receiver. Setting the diseqc 1.2 of a satellite to off after assigning a position to that satellite may change all or part of your diseqc 1.2 numbering!I have 24 diseqc 1.2 positions entered and tracking correctly using the 10429 software. It is a great headache to set up. I hope it is fixed so we can use or assign the diseqc 1.2 numbers that we need instead of what the receiver wants us to have.<a href="https://mega.nz/#!359DSDSL!Ao7QTbzzqbRe0ftwDcnZIB1vw0g487TfoVchEjE9614" target="_blank">MEGA</a></blockquote>

[QUOTE="el bandido, post: 1030814, member: 316102"] The new software seems to have changed the way Diseqc 1.2 positions are stored. Each diseqc 1.2 position has to be stored as shown in the screencap. Position 1 will be stored first, Position 2 will be stored second. Position 3 will be stored third...ETC. It does not matter what number the satellite is in the satellite list. the first diseqc 1.2 position stored will be Diseqc position 1. It is important to save each diseqc position as shown in the screencap. (See link. Cannot attach.) If you change a satellite's motor control to None after assigning a diseqc 1.2 position to that satellite, then whatever position number that satellite had will be deleted and reused by the receiver. Setting the diseqc 1.2 of a satellite to off after assigning a position to that satellite may change all or part of your diseqc 1.2 numbering! I have 24 diseqc 1.2 positions entered and tracking correctly using the 10429 software. It is a great headache to set up. I hope it is fixed so we can use or assign the diseqc 1.2 numbers that we need instead of what the receiver wants us to have. [URL="https://mega.nz/#!359DSDSL!Ao7QTbzzqbRe0ftwDcnZIB1vw0g487TfoVchEjE9614"]MEGA[/URL] [/QUOTE]

Verification