Reply to thread

Message

<blockquote data-quote="jeallen01" data-source="post: 1061992" data-attributes="member: 176704">FWIW, I can now answer&nbsp; the questions I raised in a couple of posts above:#290 - the SX88+ (and thus presumably the SX88) does transmit both DiSEqC 1.1&nbsp; and USALS commands at the &quot;same time&quot;(consecutively, I presume) if both settings are enabled.#295 - the combo of the Spaun relay and the RF-remotely controlled 12V supply for it works fine. The relay switches between the steerable TD88 and the fixed dishes with LNBs connected to the DiSEqC 1.1 10-1 Opticum switch down the garden, and thus I can connect to (say 13E) via either route simply by clicking the RF remote control switch button, with no need to go into the SX88+ menus to make any changes -&nbsp; &quot;Simples&quot; <img src="https://www.satellites.co.uk/styles/default/xenforo/smilies/smile.png"&nbsp; class="smilie" loading="lazy" alt=":)" title="Smile&nbsp; &nbsp; :)" data-shortname=":)" />PS: the RF remote is stuck to the underside of the SX88+ remote with d/s tape, and it has a sliding cover over the button to prevent accidental changes from the switched LNBs to the steerable dish.</blockquote>

[QUOTE="jeallen01, post: 1061992, member: 176704"] FWIW, I can now answer the questions I raised in a couple of posts above: #290 - the SX88+ (and thus presumably the SX88) does transmit both DiSEqC 1.1 and USALS commands at the "same time"(consecutively, I presume) if both settings are enabled. #295 - the combo of the Spaun relay and the RF-remotely controlled 12V supply for it works fine. The relay switches between the steerable TD88 and the fixed dishes with LNBs connected to the DiSEqC 1.1 10-1 Opticum switch down the garden, and thus I can connect to (say 13E) via either route simply by clicking the RF remote control switch button, with no need to go into the SX88+ menus to make any changes - "Simples" :) PS: the RF remote is stuck to the underside of the SX88+ remote with d/s tape, and it has a sliding cover over the button to prevent accidental changes from the switched LNBs to the steerable dish. [/QUOTE]

Verification