Reply to thread

Message

<blockquote data-quote="A nonymous" data-source="post: 724234" data-attributes="member: 240839">If you can wait until the middle of the week, i'll post a few pictures up that will help you.&nbsp; I just need to take them first and then return home to post them.Basically each subfeed out of the switch is basically a combined, Sat &amp; Terrestrial signal.The multiswitch takes over the part of the normal type universal lnb.&nbsp; As far as the receiver is concerned its connected to an lnb not a multiswitch.&nbsp; The multiswitch also understands DISEqC 1.0 commands which enables it to switch between hotbird and Astra.You can see in the picture the inputs on the end of the switch, the bottom 5 are sat 1 (28.2e)&amp; terrestrial, The top 4 are for sat 2 (13e).&nbsp; The sub feeds on each side are the feeds to the properties/rooms.&nbsp; Best to have 2 to each room so you can use Sky+ later on <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite8" alt=":D" title="Big Grin&nbsp; &nbsp; :D" loading="lazy" data-shortname=":D" />Your Tivusat receiver will only work if it can send DISEqC commands.&nbsp; It needs to state it needs DISEqC B otherwise it will only see the default DISEqC A signal and will report no signal.The combined sat &amp; TV signal can be as stated earlier be split up by using the correct type of wall plate.&nbsp; Like i said before if its only a small property i woould look at the Visiosat Bisat dish.NanoNano</blockquote>

[QUOTE="A nonymous, post: 724234, member: 240839"] If you can wait until the middle of the week, i'll post a few pictures up that will help you. I just need to take them first and then return home to post them. Basically each subfeed out of the switch is basically a combined, Sat & Terrestrial signal. The multiswitch takes over the part of the normal type universal lnb. As far as the receiver is concerned its connected to an lnb not a multiswitch. The multiswitch also understands DISEqC 1.0 commands which enables it to switch between hotbird and Astra. You can see in the picture the inputs on the end of the switch, the bottom 5 are sat 1 (28.2e)& terrestrial, The top 4 are for sat 2 (13e). The sub feeds on each side are the feeds to the properties/rooms. Best to have 2 to each room so you can use Sky+ later on :D Your Tivusat receiver will only work if it can send DISEqC commands. It needs to state it needs DISEqC B otherwise it will only see the default DISEqC A signal and will report no signal. The combined sat & TV signal can be as stated earlier be split up by using the correct type of wall plate. Like i said before if its only a small property i woould look at the Visiosat Bisat dish. Nano Nano [/QUOTE]

Verification