Reply to thread

Message: <blockquote data-quote="a33" data-source="post: 1037005" data-attributes="member: 332642">BTW2:For the 22kHz problem: you could still try the modification of your Zinwells, to prevent 22kHz to leave the multiswitch.Rereading the link in #28, it seems that you can cutoff power from the 22kHz-inputs very easily; and I assume (should be tested!) that includes the 22kHz signal. Then use the power inserter (externally, or as described in the link), and... DONE!BTW (for my information): When only one receiver is connected to the Zinwell, does only the active MS-input carry voltage, or all four inputs?greetz,A33</blockquote>