Reply to thread

Message: <blockquote data-quote="moonbase" data-source="post: 1056154" data-attributes="member: 178786">Luckily, I managed to remove the three bolts from the rear mounting ring without using heat. The Plus Gas releasing fluid and a torgue wrench did the job. After removing the bolts I cleaned up the internal threads of the mounting points using an M10 Tap with a squirt of cutting fluid. Couple of pics attached below.That's the first Job done, on to the next, probably removal of the sealant around the rear mounting ring followed by a low powered jet wash.</blockquote>