Reply to thread

Message: <blockquote data-quote="aceb" data-source="post: 809144" data-attributes="member: 268811">The other trick is use something like a plumbers gas torch to heat up the outer parts of what ever is stuck and while it's red hot try and seperate the two halves. I had to do this on my precision feed because the flange was stuck solid in that, heat for a minute then hit with a hammer! Inverto do a C120, the Black Pro which I use on my 1.8, seems to work OK on 7W etc but never compared it to anything else. Don't give up the dish too quickly, I know Zorch has one and his results are easily as good as my 1.2 if not better.</blockquote>