Reply to thread

Message: <blockquote data-quote="s-band" data-source="post: 1149925" data-attributes="member: 407744"><p>Choose one satellite, I usually pick a middle one, peak the signal then select re-sync, then scroll to the satellite you picked, then <enter>. It will then re-calculate as needed for all stored satellites and will display the correct az-el. This assumes that you have set it up with satellites at the ends of the arc. I can't remember but I think I turned the V/H/Skew off so I don't get asked. Mine has RC2000X firmware.</p></blockquote><p></p>