Reply to thread

Message

<blockquote data-quote="Huevos" data-source="post: 845085" data-attributes="member: 301161">There's nothing in BH to stop you overwriting it so something else must be wrong in your method. Start from scratch again with the following...Have you got another USB stick? It needs to be 8GB or smaller. Format it with the HP format tool here:hxxp://www.world-of-satellite.com/showthread.php?45-USB-Format-ToolAlso you need to make sure the bootloader is up-to-date.Unplug any other USB device that you have plugged in to the Solo.Starting with a clean/empty USB device... Unplug the Solo. Insert the USB device (front or rear socket, shouldn't matter) with the bootloader (directory structure exactly as it is in the zip file). Plug the Solo back in to the mains. Watch for the light on the USB so you know it is being read. Once that is done unplug the Solo from the mains. Clean the USB device and then load the image onto it (again with directory structure exactly as it is in the zip file). Insert the USB again and power up the Solo. Watch the USB light again. After it has been flashed you should get a message on the TV saying remove USB and switch off and on (or something to that effect).</blockquote>

[QUOTE="Huevos, post: 845085, member: 301161"] There's nothing in BH to stop you overwriting it so something else must be wrong in your method. Start from scratch again with the following... Have you got another USB stick? It needs to be 8GB or smaller. Format it with the HP format tool here: hxxp://www.world-of-satellite.com/showthread.php?45-USB-Format-Tool Also you need to make sure the bootloader is up-to-date. Unplug any other USB device that you have plugged in to the Solo. Starting with a clean/empty USB device... Unplug the Solo. Insert the USB device (front or rear socket, shouldn't matter) with the bootloader (directory structure exactly as it is in the zip file). Plug the Solo back in to the mains. Watch for the light on the USB so you know it is being read. Once that is done unplug the Solo from the mains. Clean the USB device and then load the image onto it (again with directory structure exactly as it is in the zip file). Insert the USB again and power up the Solo. Watch the USB light again. After it has been flashed you should get a message on the TV saying remove USB and switch off and on (or something to that effect). [/QUOTE]

Verification