Reflashing my 600

[acezon]

hey,
im trying to reflash my 600 but i cant get it to loader the loader by holding the power button on power up,
it worked the first time i did it and i flash pli jade on to the box but now i cant get back in to the screen to reflash the box,
any ideas?

thanks acezon

 

[sonic1]

Have you got DCHP enabled in your router ?
If not then the dreambox is not being assigned an ip address.

 

[compufunk]

Has the flash memory been erased , e.g. can you boot the box? Or is it that holding the power button is not erasing the old image?

 

[acezon]

its booting fine, and the first time i uploaded a new image to the box it worked fine , The router is all setup correctly, but when i hold the power button in it just continues to boot in to pli jade, i think Pli jade might not support hold of the power button?
Anyway i have resolved it now by telneting the box and using

mount /boot -o remount,rw
rm /boot/*
reboot

which on reboot took me too the boot loader screen, Also in the mean time i have ordered a serial card for my computer,

thanks all for your input,
acezon

 

[tomthebomb1968]

its booting fine, and the first time i uploaded a new image to the box it worked fine , The router is all setup correctly, but when i hold the power button in it just continues to boot in to pli jade, i think Pli jade might not support hold of the power button?
Anyway i have resolved it now by telneting the box and using

mount /boot -o remount,rw
rm /boot/*
reboot

which on reboot took me too the boot loader screen, Also in the mean time i have ordered a serial card for my computer,

thanks all for your input,
acezon

Glad your sorted I had the same problem with my sisters box after flashing Jade onto it. Im doing this from memory so it may not be 100% accurate but I think there is a software update menu in the system settings, maybe expert settings. Select this and the box prompts a "Are you sure"message If you select yes the box reboots and you are then able to flash from the web browser.

 

[acezon]

Thanks for that just found that in the system menu.

 

[vinayr]

Use Dream-up and a null modem cable next time ( with you new serial port card )

 

[offside]

Use Dream-up and a null modem cable next time ( with you new serial port card )

I've already use DreamUp + null 232 cable modem
it's work with one of my DM600
but, didn' work with the other

any solution?

thx