Reset Procedures for Various Receivers

[rolfw]

Started this thread as it seems to be a fairly common question. If you know the reset procedure for a receiver, please post it here.

This thread is for working resets only, no questions please

 

[rolfw]

Press Menu button and then type in 6787 this will take the receiver back to factory settings.

 

[T24]

Reset your Nokia:

Using the remote control, switch off the Mediamaster 9800 S.
The time is shown on the display.
Now press and hold the Program+ button on the Mediamaster 9800 S.
Keep holding the Program+ button and press the Program- button as well.
Keep both pressed until "CUSt" appears on the display.
When you release the two buttons, a message (Pull The Cord) appears on the display.
Remove the power cord from the socket, wait five seconds and then plug it in again.

 

[Analoguesat]

Echostar 3000. Using the remote press:

Menu 6, 6, 6, red.

 

[john_graydon]

Press Menu Button
Scroll Down to 3 Reset (Factory Reset)
Press ok
Press ok Again
Done.

 

[Analoguesat]

OK - a reminder to everyone. This thread is for information about receiver resets ONLY. It is NOT for asking questions about receiver software updates. Questions will be removed.

 

[black eagle]

Hi,For reset Kaon old boards;from STB>press 3 times exit+Remote 1...... For Kaon new boards;from STB>press 3 Times CH+Remote 1 Thanks everyone.

 

[BadWithComputer]

SilverCrest SL65

Go to system setup in the menu and select factory settings. This will wipe your box and start from the beggining.

 

[Analoguesat]

Seeing the number of folks who dont seem to understand our rules on this thread - a reminder:

This thread is for information about working receiver resets ONLY.

It is NOT for asking questions about how to reset your receiver or for questions about software updates. Questions of any sort will be removed.

 

[turtonm]

SilverCrest SL65

Go to system setup in the menu and select factory settings. This will wipe your box and start from the beggining.

On a SilverCrest SL65/12 just hold in the power button for 8 - 10 seconds this will reset the unit loosing all user data and settings this also gets round forgotten pin protection.

 

[handasa]

Topfield / 2606 this number will reset the old password