Samsung DSR9500 - Not recognizing Funcard

[jchurch]

Hi ,

I`ve just become a member on the forum and have just acquired
a USB Infinity programmer with Fun card 5.
I was hoping that some of you clever guys out there could help me out
with a problem I`ve got.

I have a Samsung 9500 VIA CI which I`ve patched with software version 118 giving the 5 in 1 patch.

I`ve managed to program the funcard OK to get ABSAT channels using the file `2ndfun5in1v1.20_Jula_AU_18.06.2003.`
After unzipping , this comes with a flash.hex file ,
`eprom_integral.hex` file and a `eprom_by_jula.hex` file.
All these load into the funcard5 via the Infinity USB programmer
with no problem. After I insert the card in the Samsung9500 it recognises the card as a Mediaguard card OK.


My problem is when I try using a different 6in1 file.
I downloaded the file off Phillsfiles.com. It is called
`davem_fun_6in1_030703.zip`.
After unzipping it it and reading the readme.txt it looked like the
files should work with a Samsung9500.

The files that I loaded onto the funcard5 were :
`flash_6in1_v4.3.hex` into the flash area of the card.
`eeprom_H_030703.hex` into the external eprom area of the card
I left the internal eeprom area blank.

Unfortunately the Samsung does not recognize the card and when I go into
the card information menu on the Samsung whereas it said mediaguard on the `2ndfun5in1v1.20_Jula_AU_18.06.2003.` files it now says
`no card` with the davem_fun_6in1_030703 files

Does anybody know why the samsung is not recognising the card.

Do I need a different type of card - eg Gold or silver ?
Do I need a different CAM.Eg Irdeto - as I understand that a lot of the
5 in 1 files operate via irdeto somehow.

I was under the impression that the 5in1 patch allowed the Samsung to
recognise : Viaaccess ,conax , Seca Mediaguard , Nagro.
I`m not sure if it does the irdeto. Does anybody know ?

Any help would be most appreciated.

Its all a bit confusing at the moment but I hope to get my head around it in the next couple of weeks.

Thanks in advance for any help.

 

[rolfw]

Although I have no experience with the patched Sammy, is there a CAM menu in which you can select different modes for the CAM, it certainly sounds as if you have used the correct procedure with the Dave M files, but may also be worth trying the Xamuh files, they are set up specifically for the Sammy.

 

[turny]

hi jchurch
the answer to your question has already been answered look at receiver upgrades and a post by steve102 remember reading past posts can be a hive of information some of it good some of it not so good.

 

[jchurch]

Thanks Rolfw / Turny

OK thanks for the information. Looks like I need an Irdeto CAM for these type of files then.

 

[reza121]

pls help for upgrade eurostar model 9700f

 

[mehdi13523693]

i have samsung9500 that cant read card and open the scramble chanales
how can i get a software for opening the scramble chanal without card or with card?

 

[T24]

Which samsung 9500 do you have?? VIACI,AY,Ci.........?

 

[mehdi13523693]

dsr9500viaci

 

[T24]

Yes,your samsung can decrypt Viaccess channels.if your samsung is patched it can

decrypt alot of channels.(load your receiver with samsung EMU) or load a silver card

with bbaio files (6in1) insert the card into the embedded cam.

Ps-insert the card into the embedded cam correctly,the chip downward..

(power OFF/ON)

Load the latest via..files works fine on fun card.

Good luck





Good luck

 

[safad]

You can use the funcard with the Sidd-9 files you can found this files in the tonys duo site

 

[T24]

Bb aio files (6in1) on Silver card works much better than sidfun9.

 

[ardalanlp]

i want software for samsung 9500 VIA CI
and i want watching the nagra channel & irdeto channel
what can i do?
thanks a lot

 

[T24]

Do you have a patched VIACI?

check the hardware,software,loader

Menu>system setup>system information.

 

[mnadeem]

hi i have same problem , the fun card is not recognizing with the receiver , but my receiver is not samsung as every one talking , It is redix dt-43 s vaci
software version DT-43S V1.0.00
firmware V1.2.1-1614SA
Terminal serial number 34-1-0001469
Viaccess version 1.1 R 484
terminal application 1000.121
O-no
so if any one can tell me what should i do, greatful to him

 

[hormoz]

pls help for upgrade eurostar model 9700f

I have the same problem, If you find the answer please say it to me.
Thanks,
Hormoz