Reply to thread

Message

<blockquote data-quote="atefalassraj" data-source="post: 631849" data-attributes="member: 298448">I am residing in Egypt and willing to establish satellite dish system in my private villaThe system comprises of 5 Dual Linear Universal LNBF’s, pointing to 5 satellites, connected to 3 Digital receivers one of these receivers is Dreambox 8000 equipped with 2 tuners, thus forming 4 virtual receivers. The LNBF’s shall be fixed to 3 Dishes:Dish 1 shall be motorized by USALS Stab motor.Dish 2 shall be equipped with 3 LNBF’s pointing to Nile Sat, Arab Sat &amp; Hot Bird Sat.Dish 3 shall be equipped with the last LNBF pointing to Amos Sat.Also the system shall include a terrestrial antenna VHF/UHF.The system shall include, in addition to the Universal Linear LNBF’s, 3 Multi-switches 3x4, one Multi-switch 4x4, 4 Diseqc switches 4x1 and 4 Diplexers.The connections between all these devices are shown on the attached diagrams.Questions:1. Is the wiring system shown in the diagram correct?2. Is the location of connection to Stab motor correct?3. Are the locations of the Diplexers correct?4. How to set-up of Diseqc switches in the Receivers software will be to access the four LNBF’s in particular Arab Sat and Hot Bird connected to 4x4 multi switch?Tanks a lot for valuable assistance.</blockquote>

[QUOTE="atefalassraj, post: 631849, member: 298448"] I am residing in Egypt and willing to establish satellite dish system in my private villa The system comprises of 5 Dual Linear Universal LNBF’s, pointing to 5 satellites, connected to 3 Digital receivers one of these receivers is Dreambox 8000 equipped with 2 tuners, thus forming 4 virtual receivers. The LNBF’s shall be fixed to 3 Dishes: Dish 1 shall be motorized by USALS Stab motor. Dish 2 shall be equipped with 3 LNBF’s pointing to Nile Sat, Arab Sat & Hot Bird Sat. Dish 3 shall be equipped with the last LNBF pointing to Amos Sat. Also the system shall include a terrestrial antenna VHF/UHF. The system shall include, in addition to the Universal Linear LNBF’s, 3 Multi-switches 3x4, one Multi-switch 4x4, 4 Diseqc switches 4x1 and 4 Diplexers. The connections between all these devices are shown on the attached diagrams. Questions: 1. Is the wiring system shown in the diagram correct? 2. Is the location of connection to Stab motor correct? 3. Are the locations of the Diplexers correct? 4. How to set-up of Diseqc switches in the Receivers software will be to access the four LNBF’s in particular Arab Sat and Hot Bird connected to 4x4 multi switch? Tanks a lot for valuable assistance. [/QUOTE]

Verification