starsat SR-X150D Plus latest version

[tharek]

where can i find the latest version link for
starsat sr-x150d plus receiver software
my receiver version 2.40 , also i checked satsw.com
same version only availabe there

anyone help me pls


thanks for all

 

[jimbo]

I've moved this here from the sports section Tharek.

 

[Rezvan2004]

where can i find the latest version link for
starsat sr-x150d plus receiver software
my receiver version 2.40 , also i checked satsw.com
same version only availabe there

anyone help me
thanks for all

 

[Essam AAA]

Hi,.....

Try this site....

www.satsw.com

Bye

 

[Digital2]

I think you guys already visited www.satsw.com but can't find the right file/folder. Well click here http://www.satsw.com/Upload/Nov_27_SR-120_130_150_2000ch_1M.zip This is the latest software for your receivers (Starsat 150) BUT first, make sure you remove the previous software through this http://www.satsw.com/Upload/sw_ver_clean_for_SR-X120,150,200CI.zip
The rest should be easy.
Hope it works out for you
<< If you need further details, go to http://www.satellites.co.uk/php-bin/forum/showthread.php?t=31602 and follow thread # 7 & #8 (except that you use the software for YOUR receiver as per links I just gave u)>>

 

[nhfs49]

dear tharek, if the bin file fits to your receiver's model then it's not necessaire to use the cleaner. you can directly upload the new software.

 

[gogol]

I think you guys already visited

www.satsw.com but can't find the right file/folder. Well click here http://www.satsw.com/Upload/Nov_27_SR-120_130_150_2000ch_1M.zip This is the latest software for your receivers (Starsat 150) BUT first, make sure you remove the previous software through this http://www.satsw.com/Upload/sw_ver_clean_for_SR-X120,150,200CI.zip
The rest should be easy.
Hope it works out for you
<< If you need further details, go to http://www.satellites.co.uk/php-bin/forum/showthread.php?t=31602 and follow thread # 7 & #8 (except that you use the software for YOUR receiver as per links I just gave u)>>

Dear Digital2 ​

and thanks from your brilliant comments.​

my question is?​

in the adress you have mentioned there is a simillar soft ware:​

Jan_22_SR-X120_130_150_2000CH_1M.zip, and the one you had mentioned (Nov_27_SR-120_130_150_2000ch_1M.zip is not anymore there .​

i would be pleased if you shall tell me wethere i can use it to upgrade my StarSat, SR-X150+ or not?​

and since this is my first time that i am upgrading my system is it neccessary to use sw_ver_clean_for_SR-X120,150,200CI.zip first?

regards
gogol

 

[gogol]

can any one tell me what is the differrence between *.BIN and *.Sgn files????

i am confused with this Emupgrade????
please help me

 

[gogol]

i have used the file Jan_22_SR-X120_130_150_2000CH_1M.zip, for upgrading my star sat SR-X150+ but now my resiver is not working any more

then I removed the previous software through this _http://www.satsw.com/Upload/sw_ver_clean_for_SR-X120,150,200CI.zip
but i still cannot download soft ware because i recieve error about wrong S/W version?
PPPPPPlease help me because otherwise i will be kicked by my wife and children....

 

[gogol]

i was going to upgrade my STAR SAT SR-X150D+ by emupgrade with _http://www.satsw.com/Upload/Jan_22_SR-X120_130_150_2000CH_1M.zip
but it did not worked.

so i used the _http://www.satsw.com/Upload/sw_ver_clean_for_SR-X120,150,200CI.zip but after that it did not worked again and so my reciever is not working at all!!!!

and once again i tried but this time i mistakenly choosed SDX instead of prog,data(in emupgrade) this time upgrade was complete but the reciever give an ERROR(sw not match, ERR 07) i do not know what to do????

now even after sw-ver clean when i upload the version it shows: HW=35.31, SW=36.3, Model ID= 7A20) please someone guide me what to do???
you can also Email me: emamddrc*ams.ac.ir

thanks in advance

 

[gogol]

can any body tell me what is the last upgrade for STAR SAT SR-X150D+?

 

[gogol]

it is the forth day i am sending my question but no reply cames?

am i doing it in the right way? or just wasting my time?

 

[Analoguesat]

it is the forth day i am sending my question but no reply cames?

am i doing it in the right way? or just wasting my time?

Yes we know and we would appreciate it if you didnt scatter your requests over several threads - folks end up wasting their time duplicating answers you already have on a previous thread.

As for your problem - give us a chance - many folks only log on a couple of times a week. Or it might be that no-one knows of course. You could just take it back to the nearest dealer and have them flash it correctly for you. ;)

 

[gogol]

[quote="Analoguesat"]Yes we  know and we would appreciate it if you didnt scatter your requests over several threads - folks end up wasting their time  duplicating answers you already have on a previous thread. 

As for your problem - give us a chance - many folks only log on a couple of times a week. Or it might be that no-one knows of course. You could just take it back to the nearest dealer and have them flash it correctly for you.  ;)  :)[/QUOTE]

thank you for your time to answer, the point is that i have just followed the guides in the previous threads and it damaged my reciever so i am seeking for a help to reinstall my star sat sr-x150+ reciever with a software or any other way.....

 

[Analoguesat]

I would guess you should be able to just over-write the software file onto the receiver. HOWEVER you need the correct s/w or obviously it wont work. If you are completely stuck you may need to contact a dealer.

 

[Neki]

i was going to upgrade my STAR SAT SR-X150D+ by emupgrade with http://www.satsw.com/Upload/Jan_22_SR-X120_130_150_2000CH_1M.zip
but it did not worked.

so i used the http://www.satsw.com/Upload/sw_ver_clean_for_SR-X120,150,200CI.zip but after that it did not worked again and so my reciever is not working at all!!!!

and once again i tried but this time i mistakenly choosed SDX instead of prog,data(in emupgrade) this time upgrade was complete but the reciever give an ERROR(sw not match, ERR 07) i do not know what to do????

now even after sw-ver clean when i upload the version it shows: HW=35.31, SW=36.3, Model ID= 7A20) please someone guide me what to do???
you can also Email me: emamddrc*ams.ac.ir

thanks in advance

The error ERR 07 you got is only because you have not downloaded the right software into your receiver which should match with your H/W version. I believe one of the below files should match with your receiver and you should have back all the channels:
Jan_22_SR-X120_130_150_2000CH_1M
Jan_22_SR-X120_130_150_4000CH_2M

Jan_22_SR-X120_130_150_4000CH_V7

Good luck!

N...

 

[gogol]

[quote="Neki"]The error ERR 07 you got is only because you have not downloaded the right software into your receiver which should match with your H/W version. I believe one of the below files should match with your receiver and you should have back all the channels:
[color=red][url="http://www.satsw.com/Upload/Jan_22_SR-X120_130_150_2000CH_1M.zip"][b][color=red][font=Arial]Jan_22_SR-X120_130_150_2000CH_1M[/font][/color][/b][/url][/color]
[color=red][url="http://www.satsw.com/Upload/Jan_22_SR-X120_130_150_4000CH_2M.zip"][b][color=red]font=Arial]Jan_22_SR-X120_130_150_4000CH_2M[/font][/color][/b][/url][/color]

[color=red][url="http://www.satsw.com/Upload/Jan_22_SR-X120_130_150_4000CH_V7.zip"][b][color=red][font=Arial]Jan_22_SR-X120_130_150_4000CH_V7[/font][/color][/b][/url][/color]
[color=red][color=black][/color][/color]
[color=red][color=#000000]Good luck![/color][/color]
[color=red][color=#000000][/color][/color]
[color=red][color=#000000]N...[/color][/color][/QUOTE]

thanks a lot Neki for your patient and wise comments
i also got your reply from another thread too and sorry for incovenience that i made for you.
as a matter of fact i am out of home just now but while i downloaded one of the file you mentiend:
Jan_22_SR-X120_130_150_4000CH_2M
i figured out that the H/W of this file is 3.01 which as far as i remmember would be compatible with me reciever O-Ha .

tommorrow i will try it on the reciever and inform you from the result.

greatly appreciating your comment and wishing you good luck

Gogol

 

[shahroooz]

dear gogol

As you may know there are three types of update files for SR-150D starsat recievers which refers to the hardware model:
SR-X120,130,150D CH2000,1M (1 megabyte cash memory)
SR-X120,130,150D CH4000,2M (2 megabyte cash memory)
SR-X120,130,150D CH2000,V (V series hardware)
I think that you have not choosen the correct file for your reciever
you can see your reciever hardware model in menu.then get the right file
I hope a successful updating for you

Sincerely yours
Shahrouz

 

[gogol]

thanks a lot Neki for your patient and wise comments
i also got your reply from another thread too and sorry for incovenience that i made for you.
as a matter of fact i am out of home just now but while i downloaded one of the file you mentiend:
Jan_22_SR-X120_130_150_4000CH_2M
i figured out that the H/W of this file is 3.01 which as far as i remmember would be compatible with me reciever O-Ha .

tommorrow i will try it on the reciever and inform you from the result.

greatly appreciating your comment and wishing you good luck

Gogol

thanks a lot Neki
by your advise i finally update my reciever and now every thing is in its best Humping

 

[gogol]

dear gogol

As you may know there are three types of update files for SR-150D starsat recievers which refers to the hardware model:
SR-X120,130,150D CH2000,1M (1 megabyte cash memory)
SR-X120,130,150D CH4000,2M (2 megabyte cash memory)
SR-X120,130,150D CH2000,V (V series hardware)
I think that you have not choosen the correct file for your reciever
you can see your reciever hardware model in menu.then get the right file
I hope a successful updating for you

Sincerely yours
Shahrouz

thanks shahroooz
you were right i had got the 1M but mine was 2M so i have a fresh updated reciever now.....