Reply to thread

Message

<blockquote data-quote="MCelliotG" data-source="post: 994088" data-attributes="member: 404726">4. Analyzing the streamAfter rebooting, first make sure the fake service appears on your channel list with the given name. If everything went right it will tune normally with no error messages, and of course with no picture/sound.Now, we are ready to preview what’s “inside” this fake service. In order to do that, we will have to analyze the stream using the astra commands.First off we need to have astra-sm installed. For this we need a telnet tool to connect to our STB. In this example I used putty.After connecting with putty give this command:[CODE]opkg install astra-sm[/CODE]<img src="https://s13.postimg.org/yyg2k344n/putty1.png" alt="" class="fr-fic fr-dii fr-draggable " style="" /> Astra is finally installed. Now let’s analyze our stream. For that we need the serviceref of the fake service we created to be streamed within our STB. We will use 127.0.0.1:8001 which is our STB’s internal IP and relay port and the serviceref of our fake service.Let's now see the analyze results.</blockquote>

[QUOTE="MCelliotG, post: 994088, member: 404726"] [SIZE=5][B]4. Analyzing the stream[/B][/SIZE] After rebooting, first make sure the fake service appears on your channel list with the given name. If everything went right it will tune normally with no error messages, and of course with no picture/sound. Now, we are ready to preview what’s “inside” this fake service. In order to do that, we will have to [B]analyze[/B] the stream using the astra commands. First off we need to have astra-sm installed. For this we need a telnet tool to connect to our STB. In this example I used putty. After connecting with putty give this command: [CODE]opkg install astra-sm[/CODE] [IMG]https://s13.postimg.org/yyg2k344n/putty1.png[/IMG] Astra is finally installed. Now let’s analyze our stream. For that we need the serviceref of the fake service we created to be streamed within our STB. We will use [COLOR=#0000ff][B]127.0.0.1:8001[/B][/COLOR] which is our STB’s internal IP and relay port and the serviceref of our fake service. Let's now see the analyze results. [/QUOTE]

Verification