Reply to thread

Message: <blockquote data-quote="Red alert" data-source="post: 1141987" data-attributes="member: 414470"><p>Opened up the motor further. How does it look, I can’t tell if something is broken in the photos attached. When I removed the upper part which connects to the coil below I found a few more metal pieces rattling below. This leads me to believe that the metal bearing broke and was stuck between the cogs. I was also able to manually move the motor manually by moving the cog on the coil below. But as soon as I put the parts back together it seems its same problem. So not sure what else to remove and check/clean?</p></blockquote><p></p>