technomate tms- 1000 d help

[sheytoon]

please help i am using a null cable. to-connect my technomate tms 1000 d box to my pc when i click conect It will say something like version 1.66 detected but it doesnt give me start option no option to choose anything else part from exit can some one help me plz
i am using v1.8 loader

 

[Robbo]

Hi,

You only press the connect button once you have told it what you want to do.
E.G To download new firmware, you click the 'Software' tab. Browse for the *.stb file that you want to download. Then press connect.

The same goes for 'channels', except you can upload or download those.

 

[sheytoon]

yes thats what i did but nothing hapening it just say conect the tm and turn it on

 

[sheytoon]

Hi,

You only press the connect button once you have told it what you want to do.
E.G To download new firmware, you click the 'Software' tab. Browse for the *.stb file that you want to download. Then press connect.

The same goes for 'channels', except you can upload or download those.

when i press conect it says conect your reciever and turn it on which i do but nothing hapening plz help me

 

[v9oly]

Have you clicked the 'auto detect' button to check your connection is healthy?
If it is and you are updating your patch then ensure you have 'software' selected, the click 'browse' selct your new patch, then press 'connect'. Now your new patch should download to the stb, I am going from memory as I haven't used this receiver for a while!

Regards,
Ollie

 

[Robbo]

Have you clicked the 'auto detect' button to check your connection is healthy?
If it is and you are updating your patch then ensure you have 'software' selected, the click 'browse' selct your new patch, then press 'connect'. Now your new patch should download to the stb, I am going from memory as I haven't used this receiver for a while!

Regards,
Ollie

Yes that's right Ollie.
It has to find which com port it's on.

The bit that's confusing me though, is that it is reporting the software version, which it gets from the box.

 

[v9oly]

Agree Robbo, again from memory, isn't this the message you get when you press 'auto detect'? (Not connect).

 

[sheytoon]

Yes that's right Ollie.
It has to find which com port it's on.

The bit that's confusing me though, is that it is reporting the software version, which it gets from the box.

yes it has find which port and i have choose the software from browser but when clich on conect it detect the reciever software virsion but after that it doesnt do anything plz help

 

[sheytoon]

when i turn on the reciever loader detect th virsion 1.66 and it should then give me option to start the transfer but it doesnt

 

[v9oly]

Try upgrading your loader to v187 and see if this helps.
Are you updating to the patch dated 20/9/07?

Regards,
Ollie

 

[sheytoon]

Try upgrading your loader to v187 and see if this helps.
Are you updating to the patch dated 20/9/07?

Regards,
Ollie

i am uning loader v187
no i am updating patch
Technomate_TM1000D_TM1000D+_170.stb
and
Darkman_Patch_TM1000D_TM-1000D+09-11-2007.stb

 

[Robbo]

To test the communication out, can you upload and download the channel list?

Try a factory reset maybe?

Have you bu99ered up a previous download.?
If so, there is one way it might work and that is by having the box switched off at the mains. Then start the connect ( to download new softaware) and switch the box back on at the mains at the same time.
N.B Do this at your own risk, because I have never tried this.

By the way, the DM software you're trying to load is out of date, you want the one Ollie has mentioned.