Reply to thread

Message

<blockquote data-quote="Vipersan" data-source="post: 969696" data-attributes="member: 325666">The Story so far ..I have installed Jaero 64 bit on the new cloned O/S in the optiplex 990 ..I am using the Optiplex 620 to drive the lnb ..but the loop out is now fed to Airspy connected to the 990..I have downloaded what I assume to be the latest version of SDR# ..though this doesn't specifically say for 64 bit..it is running on the 990 ..I can see the T data burst packets ..I have installed a supposedly 64 bit version of VAC414 .. the data IS reaching Jaero ...but with a very strange lag ..even though the audio monitored at the speaker is real-time ...and is listening on the same virtual cable with a repeater ..Something very very odd going on here ..as I still can use and jaero still interprets data on the Optiplex 620 just fine ..In fact I'm now using the lnb on the TD110 at 15W ...and it IS doing the job ..No ...the problem is in the new build ??Im going to try just transporting the exact version of SDR# I was using on the 620 ... accross to the 990 ..to see if it will run ..and IF it gets the correct responses on Jaero ..??</blockquote>

[QUOTE="Vipersan, post: 969696, member: 325666"] The Story so far .. I have installed Jaero 64 bit on the new cloned O/S in the optiplex 990 .. I am using the Optiplex 620 to drive the lnb ..but the loop out is now fed to Airspy connected to the 990.. I have downloaded what I assume to be the latest version of SDR# ..though this doesn't specifically say for 64 bit..it is running on the 990 .. I can see the T data burst packets .. I have installed a supposedly 64 bit version of VAC414 .. the data IS reaching Jaero ...but with a very strange lag ..even though the audio monitored at the speaker is real-time ...and is listening on the same virtual cable with a repeater .. Something very very odd going on here ..as I still can use and jaero still interprets data on the Optiplex 620 just fine .. In fact I'm now using the lnb on the TD110 at 15W ...and it IS doing the job .. No ...the problem is in the new build ?? Im going to try just transporting the exact version of SDR# I was using on the 620 ... accross to the 990 ..to see if it will run ..and IF it gets the correct responses on Jaero .. ?? [/QUOTE]

Verification