Reply to thread

Message

<blockquote data-quote="Trust" data-source="post: 913888" data-attributes="member: 181524">Got mine SL3K&nbsp; this week with 2 SUP2400 , at one already made the 5 volt mod .Attached the lnb to my lnb changer on my Fibo 120 with lnb 1&nbsp; in front of the subreflector .Tweaked al little with AZ and Elv untill max needles at spectrum and scanned 19.2 EFound that Horse feed with picture without tweaking the focus , wich I planning to do at better weather .The lnb changer controlled by PLC has now only 3 positions by 3 endswitches .I am planning to let it operate again with DiseqC 1.2 with a separate receiver (just for turning the lnb changer)Putting the SL3K in the middle , between&nbsp; the KU an C lnb , gives me with the diseqc motor control the oppertunity to make 2 more positions .So I can the&nbsp; KA left (1) and&nbsp; KA right (3) turn in focus for the subreflector .Also planning the waveguide mod for H/V .To me its not clear wich lnb is switched on at what setup (22 kHz on/off) , VS can you point me to that from the drawing ?The SUP2400 (both) inline with a standard KU lnbf , give picture with the normal stored frequenties , it seems to do nothing with the KU signal .[ATTACH=full]72811[/ATTACH] [ATTACH=full]72812[/ATTACH]</blockquote>

[QUOTE="Trust, post: 913888, member: 181524"] Got mine SL3K this week with 2 SUP2400 , at one already made the 5 volt mod . Attached the lnb to my lnb changer on my Fibo 120 with lnb 1 in front of the subreflector . Tweaked al little with AZ and Elv untill max needles at spectrum and scanned 19.2 E Found that Horse feed with picture without tweaking the focus , wich I planning to do at better weather . The lnb changer controlled by PLC has now only 3 positions by 3 endswitches . I am planning to let it operate again with DiseqC 1.2 with a separate receiver (just for turning the lnb changer) Putting the SL3K in the middle , between the KU an C lnb , gives me with the diseqc motor control the oppertunity to make 2 more positions . So I can the KA left (1) and KA right (3) turn in focus for the subreflector . Also planning the waveguide mod for H/V . To me its not clear wich lnb is switched on at what setup (22 kHz on/off) , VS can you point me to that from the drawing ? The SUP2400 (both) inline with a standard KU lnbf , give picture with the normal stored frequenties , it seems to do nothing with the KU signal . [ATTACH=full]72811[/ATTACH] [ATTACH=full]72812[/ATTACH] [/QUOTE]

Verification