Reply to thread

Message

<blockquote data-quote="Trust" data-source="post: 914532" data-attributes="member: 181524">At a German board they suggested to use as they call it &quot; Polystyrol &quot; a kind of hard foame 2.5 mm thick and 12 x 20 long .The SL3K is&nbsp; there unknown (not anymore ) they use modded Soarsat lnb's Inverto and TriaxMember Eric has such modded Triax TKT001 and he told me the DE plate should be in front of the Triax wavepipe , even with the deepest rim .If you look carefuly to the picture you can see that black (sorry) foam plate .For my setup it did't work wel , only 0.5 dB increase , so I tried the creditcard , with a lot more succes .Did not open or modded the SL3K , I was so lucky to get a type with round wave pipes , that made it quit simple to attach those Triax feedhorn .I think it will not work wenn you dont use a extra feedhorn .Next thing for me to do is , on the lathe , make a copy of that Triax feedhorn for the other KA port to receive only circular , because the signal at 42º E is now gone .And to add a 4rd stop position at my lnb changer&nbsp; to get KU - C- KaLin and KaCirc lnb's [ATTACH=full]73021[/ATTACH] in focus .</blockquote>

[QUOTE="Trust, post: 914532, member: 181524"] At a German board they suggested to use as they call it " Polystyrol " a kind of hard foame 2.5 mm thick and 12 x 20 long . The SL3K is there unknown (not anymore ) they use modded Soarsat lnb's Inverto and Triax Member Eric has such modded Triax TKT001 and he told me the DE plate should be in front of the Triax wavepipe , even with the deepest rim . If you look carefuly to the picture you can see that black (sorry) foam plate . For my setup it did't work wel , only 0.5 dB increase , so I tried the creditcard , with a lot more succes . Did not open or modded the SL3K , I was so lucky to get a type with round wave pipes , that made it quit simple to attach those Triax feedhorn . I think it will not work wenn you dont use a extra feedhorn . Next thing for me to do is , on the lathe , make a copy of that Triax feedhorn for the other KA port to receive only circular , because the signal at 42º E is now gone . And to add a 4rd stop position at my lnb changer to get KU - C- KaLin and KaCirc lnb's [ATTACH=full]73021[/ATTACH] in focus . [/QUOTE]

Verification