Reply to thread

Message

<blockquote data-quote="a33" data-source="post: 1040429" data-attributes="member: 332642">Maybe of interest: The eutelsat document for motor commands of diseqc 1.2; if not all of you know that already:&nbsp;<a href="https://www.eutelsat.com/files/contributed/satellites/pdf/Diseqc/associated%20docs/positioner_appli_notice.pdf" target="_blank">https://www.eutelsat.com/files/contributed/satellites/pdf/Diseqc/associated docs/positioner_appli_notice.pdf</a>Note the last paragraph of section 3.5: ¨In all the above circumstances, if the East (Soft) Limit has been Set and Enabled, then the motor should stop driving if it reaches the stored limit point before completing the defined task.¨(Does this also apply to the East (Hard) Limit? Not explicitely. But it sets a standard for the expected motor behaviour under diseqc 1.2 command, I would say.)However, the why of the weird motor behaviour still is unclear.[USER=412012]@RustySpoons[/USER] : I'm very curious as to what will happen if you disconnect receiver connection before reaching the limit switch (with the external power)....greetz,A33</blockquote>

[QUOTE="a33, post: 1040429, member: 332642"] Maybe of interest: The eutelsat document for motor commands of diseqc 1.2; if not all of you know that already: [URL]https://www.eutelsat.com/files/contributed/satellites/pdf/Diseqc/associated%20docs/positioner_appli_notice.pdf[/URL] Note the last paragraph of section 3.5: [I]¨In [U][B]all[/B][/U] the above circumstances, if the East (Soft) Limit has been Set and Enabled, [B]then the motor should stop driving if it reaches the stored limit point[/B] before completing the defined task.¨[/I] (Does this also apply to the East (Hard) Limit? Not explicitely. But it sets a standard for the expected motor behaviour under diseqc 1.2 command, I would say.) However, the why of the weird motor behaviour still is unclear. [USER=412012]@RustySpoons[/USER] : I'm very curious as to what will happen if you disconnect receiver connection before reaching the limit switch (with the external power).... greetz, A33 [/QUOTE]

Verification