Reply to thread

Message

<blockquote data-quote="td_noob" data-source="post: 868661" data-attributes="member: 401831">Thank you very much Llew. I will write down all the problems I am having so you know where I am, although I am starting to think the box may be faulty as when it loads, I cannot always press the buttons, for example I cannot always press 'Menu' and the remote control doesn't always work either.I have assigned the PC an IP address, and I have entered that address into the TD on the setup menu (left arrow, enter on boot up). I have put that in the RIP section, and I have assigned the TD box an IP in the LIP section. When I go onto the tool on the PC, I click 'Search' and scroll to 'Update Software' on the TD box in the boot up settings menu. The red bar on the TD Tool turns green, then after around 5 seconds the box says 'Network Error' and on the software it says 'Login Failed' and the bar turns red again. This leads me to believe they both see each other?Also - When the box is loaded, it doesn't seem to save the language so I have to change the language each time. Finally when I go into network settings, the 'Network Interface' is a problem. I try to change to IPv4 (or whatever it is) click save and it does not save. All of the settings (IP, Gateway etc) are all set to 0.0.0.0 and I cannot change them either? The DNS is set to 255.255.255.255 which i cannot change either.Sorry for the essay just thought I would give as much details as I could <img src="https://www.satellites.co.uk/styles/default/xenforo/smilies/smile.png"&nbsp; class="smilie" loading="lazy" alt=":)" title="Smile&nbsp; &nbsp; :)" data-shortname=":)" />many thanks</blockquote>

[QUOTE="td_noob, post: 868661, member: 401831"] Thank you very much Llew. I will write down all the problems I am having so you know where I am, although I am starting to think the box may be faulty as when it loads, I cannot always press the buttons, for example I cannot always press 'Menu' and the remote control doesn't always work either. I have assigned the PC an IP address, and I have entered that address into the TD on the setup menu (left arrow, enter on boot up). I have put that in the RIP section, and I have assigned the TD box an IP in the LIP section. When I go onto the tool on the PC, I click 'Search' and scroll to 'Update Software' on the TD box in the boot up settings menu. The red bar on the TD Tool turns green, then after around 5 seconds the box says 'Network Error' and on the software it says 'Login Failed' and the bar turns red again. This leads me to believe they both see each other? Also - When the box is loaded, it doesn't seem to save the language so I have to change the language each time. Finally when I go into network settings, the 'Network Interface' is a problem. I try to change to IPv4 (or whatever it is) click save and it does not save. All of the settings (IP, Gateway etc) are all set to 0.0.0.0 and I cannot change them either? The DNS is set to 255.255.255.255 which i cannot change either. Sorry for the essay just thought I would give as much details as I could :) many thanks [/QUOTE]

Verification