Reply to thread

Message: <blockquote data-quote="Terryl" data-source="post: 1082514" data-attributes="member: 369937">I would use the 6 mm wire, and the turn buckles need to be rated for what ever the load on the guy wires would be, 3 way or 4 way guy points, it does not matter, as long as the wires are not in the way of the swing of the dish.I use a 3 way in most antenna installs, it's easier to setup, but on some roof installs I have to use a 4 way, it all depends on the roof (or mounting surface) and antenna's used.Also if the mounting pole used is supported by a tripod like what you have it should not sag, but as said a pole extender may cause problems, use a single pole as long as you can get to do the job.</blockquote>