Reply to thread

Message: <blockquote data-quote="Red alert" data-source="post: 1084083" data-attributes="member: 414470">Used a digital spirit level to see how level pole and brackets are, the pole is 0.17 degrees off east/west. Also 0.17 off north/south. What seems to be the issue is the dish bracket on motor pole is 1.22 degrees off, could this amount cause tracking issues? I also checked level on top of motor pole, which is 0.87 degrees off. Back of dish looks like is 0.17 degrees off. See photos attached. Do all those values need to be 0.0 to track sat arc?The photos were taken when motor at 0 position.Your thoughts?</blockquote>