Reply to thread

Message: <blockquote data-quote="Red alert" data-source="post: 1084996" data-attributes="member: 414470">Just set up the new motor and not receiving signal from any satellite. Not sure what is going wrong. The motor itself was easier to setup than Stab, but not sure why receiver has 0% SNR even on 28.2 east. The dish still has line of sight on all east sats. The receiver tuner is set on simple and USALS. I even tried changing to Diseqc 1,2 and still the same. The receiver cable is connected to the connector on the LED side of the motor and the lnb cable is connected to the other. The LED is green.Any ideas.</blockquote>