Reply to thread

Message: <blockquote data-quote="Mickha" data-source="post: 1087287" data-attributes="member: 187442">Your receiver works it all out for you, if using USALS.You set everything to 0, dish, motor, and LNB, input your Latitude, and Longitude, into your receiver, as your Longitude is -2.1, use 2.1 West, then use your receiver to send the dish to 1W, or other satellite.As your Longitude is 2.1W the receiver should send your motor just over 1 degree East, as 1W is just over 1 degree East of 2.1W.You then physically align your dish onto 1W and 0, on your motor, should then be pointing at 2.1W.</blockquote>