Reply to thread

Message

<blockquote data-quote="antrabe" data-source="post: 1087324" data-attributes="member: 410118">No success today. i have to install a wire to the pole to decline a little bit backwards. its almost plumbed.The problem that i have is if i have tune in 19ºE fine i lost the rest to the W.My procedure is put the motor 0 in line with the dish point to the 5W when is almost 95% tight the nuts. then i suppouse that should works.W sat works fine but the problem is E sats that i lost&nbsp; most of them.tomorrow i give another try.There is anyway to reset the motor maybe the motor is not well and the 0 is moved.ok i found how to reset in this wayHARDWARE RESET BY DiSEqC MOTOR 1. Cut off the power by disconnecting the coaxial cable. 2. Press and hold both EAST / WEST buttons for 5 seconds. 3. Reconnect the coaxial cable. 4. LED1 and LED2 blink for 5 seconds. 5. Then, its memory erased, the receiver rewrites the satellite table to initial one and corrects the “0”My latitude is 37 then my dish should be 29.1? [ATTACH=full]129832[/ATTACH]</blockquote>

[QUOTE="antrabe, post: 1087324, member: 410118"] No success today. i have to install a wire to the pole to decline a little bit backwards. its almost plumbed. The problem that i have is if i have tune in 19ºE fine i lost the rest to the W. My procedure is put the motor 0 in line with the dish point to the 5W when is almost 95% tight the nuts. then i suppouse that should works. W sat works fine but the problem is E sats that i lost most of them. tomorrow i give another try. There is anyway to reset the motor maybe the motor is not well and the 0 is moved. ok i found how to reset in this way HARDWARE RESET BY DiSEqC MOTOR 1. Cut off the power by disconnecting the coaxial cable. 2. Press and hold both EAST / WEST buttons for 5 seconds. 3. Reconnect the coaxial cable. 4. LED1 and LED2 blink for 5 seconds. 5. Then, its memory erased, the receiver rewrites the satellite table to initial one and corrects the “0” My latitude is 37 then my dish should be 29.1? [ATTACH type="full"]129832[/ATTACH] [/QUOTE]

Verification