Reply to thread

Message: <blockquote data-quote="Mickha" data-source="post: 1087669" data-attributes="member: 187442">Have you checked that your LNB is sited correctly, by sliding it back and forth?I still think you might need to do some gentle tweaking, unless you have obstructions, at 39E and 42E, blocking the signal.Try to ignore the dish bracket information, this is usually just a guide, and try adjusting your motor angles, slightly, then compensate by adjusting your dish bracket, to peak the signal quality, on 0.8W. But always make a note, of where they currently are, so if it gets worse you can quickly move it back again.Then check the signal quality readings, on the satellites.</blockquote>