Reply to thread

Message: <blockquote data-quote="vma" data-source="post: 998996" data-attributes="member: 256592">There's no stopping...New version avaliable:2016-12-28:<ul> <li data-xf-list-type="ul">Improved GUI: orange fields cannot be edited, blue field can be edited</li> <li data-xf-list-type="ul">All numeric input fields (except in Setup tab) are now input through input form and values are validated/checked</li> </ul>Forgot to mention in the change log, that I improved the COM-port detection: if wrong COM port is set or no device present, a single error message is shown and then the software aborts. Upon a restart, the COM setting can be corrected. No more Task Manager!By the way, the software looks much better now, all input fields open a propper frequency/percentage/timer input form and the values are checked, so that the software doesn't abort or do silly things.I colour coded the fields: salmon red means that you cannot edit those values, light blue means you can click the field and change the value.Finally I improved the centre frequency input (forgot to mention that in the change log, too - need to add that later on). When inserting a centre frequency, the software will check against lower and upper frequency limits of the selected device and adjust the span as required.Example: Start Frequency = 1000MHz, End Frequency= 2000MHz, Span=1000MHz. You now select 4000MHz as Centre Frequency and what happens is that you will get Start Frequency=3600MHz, End Frequency=4400MHz and Span=800MHz. Why? Because you cannot have a Centre Frequency=4000MHz AND a Span=1000MHz, because the device only goes up to 4400MHz. That was previously totally wrong... I'm glad nobody complained...Hope you guys like the looks and feel of the new version - I certainly do!Regards,Vitor</blockquote>

Verification