Reply to thread

Message

<blockquote data-quote="A nonymous" data-source="post: 805701" data-attributes="member: 240839">You need to input the co-ordinates so that the receiver knows where the dish is in relation to the satellite <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite8" alt=":D" title="Big Grin&nbsp; &nbsp; :D" loading="lazy" data-shortname=":D" />Nine times out of 10 the dish is never installed with USALS in mind so you may have to mess with the co-ordinates to get it to correspond with the satellite positions.&nbsp; The other alternative is to put in the correct co-ordinates and send the dish to 1w and then adjust the motor until you get the best possible signal off 1w.Once it has found 1w, if the dish &amp; Motor are installed correctly it should then find all the other satellites automatically when you tell it to search for the channels.Your co-ordinates would be something like 003.600 E and 051.300 NNano</blockquote>

[QUOTE="A nonymous, post: 805701, member: 240839"] You need to input the co-ordinates so that the receiver knows where the dish is in relation to the satellite :D Nine times out of 10 the dish is never installed with USALS in mind so you may have to mess with the co-ordinates to get it to correspond with the satellite positions. The other alternative is to put in the correct co-ordinates and send the dish to 1w and then adjust the motor until you get the best possible signal off 1w. Once it has found 1w, if the dish & Motor are installed correctly it should then find all the other satellites automatically when you tell it to search for the channels. Your co-ordinates would be something like 003.600 E and 051.300 N Nano [/QUOTE]

Verification