Reply to thread

Message

<blockquote data-quote="Mark_C89" data-source="post: 888949" data-attributes="member: 402381">Well I will do some investigating as for Azimuth I have a feeling this could be slightly out, as for elevation I think this is correct as there's very small room for error when I was setting elevation. Slightly wrong and if would lose enough signal to lose picture on my box!My LNB has quite a long enough neck for in-out placement to be adjusted, when I first set this up I had this all the way out and everything was as best as I could get it.The skew adjustment may also be the culprit as it seems to me to have a lot of room for error on my dish, I could actually turn it quite alot before losing picture on my box (but the skew adjustment for my location is 0.7 so practically straight.I will somehow get hold of a metre if not now definitely when I see about a future improvement to my set-upas your right the standard DIY SAT KIT is not quite enough! especially for me when my signal isn't fantastically strongThanks Guys</blockquote>

[QUOTE="Mark_C89, post: 888949, member: 402381"] Well I will do some investigating as for Azimuth I have a feeling this could be slightly out, as for elevation I think this is correct as there's very small room for error when I was setting elevation. Slightly wrong and if would lose enough signal to lose picture on my box! My LNB has quite a long enough neck for in-out placement to be adjusted, when I first set this up I had this all the way out and everything was as best as I could get it. The skew adjustment may also be the culprit as it seems to me to have a lot of room for error on my dish, I could actually turn it quite alot before losing picture on my box (but the skew adjustment for my location is 0.7 so practically straight. I will somehow get hold of a metre if not now definitely when I see about a future improvement to my set-up as your right the standard DIY SAT KIT is not quite enough! especially for me when my signal isn't fantastically strong Thanks Guys [/QUOTE]

Verification