Reply to thread

Message

<blockquote data-quote="rolfw" data-source="post: 11368" data-attributes="member: 175057">OK, if you're getting the lower transponder then at least we know that its probably not dish alignment and more likely the receiver or LNB.Next thing to check is which frequencies and polarisations the missing channels are using. You may find that they are all Vertical channels, that would coincide with the default transponder not being found.Try 10.847 V&nbsp; tp 50&nbsp; SR 22,000 FEC 5/6, that would then have tested both polarities. Using&nbsp; <a href="http://www.lyngsat.com/dig/skyuk.shtml" target="_blank">This Page</a>&nbsp; find a transponder above 12.000 in both H and V, this will test the 22?Khz tone switch and then you may get some guide to a pattern.If there is no obvious pattern using the above test methods, then list the programmes that you can get and find them on the Lyngsat list, that may reveal a pattern.&nbsp; There have also been problems like this caused by the software but I would guess that you have tried a forced update.</blockquote>

[QUOTE="rolfw, post: 11368, member: 175057"] OK, if you're getting the lower transponder then at least we know that its probably not dish alignment and more likely the receiver or LNB. Next thing to check is which frequencies and polarisations the missing channels are using. You may find that they are all Vertical channels, that would coincide with the default transponder not being found. Try 10.847 V tp 50 SR 22,000 FEC 5/6, that would then have tested both polarities. Using [URL=http://www.lyngsat.com/dig/skyuk.shtml][color=red]This Page[/color][/URL] find a transponder above 12.000 in both H and V, this will test the 22?Khz tone switch and then you may get some guide to a pattern. If there is no obvious pattern using the above test methods, then list the programmes that you can get and find them on the Lyngsat list, that may reveal a pattern. There have also been problems like this caused by the software but I would guess that you have tried a forced update. [/QUOTE]

Verification