Reply to thread

Message

<blockquote data-quote="DonSE2" data-source="post: 1109325" data-attributes="member: 414325">Yes what complicates it is the TD110 outer rim is bent when a loose shed door fell into it, from that point it's had a few other knocks when builders were in.&nbsp; The installer who did it originally but not currently working I suspect had it perfect but after the knocks it has been down to me to tweak it.&nbsp; I reckon i've done a pretty good job of it but i've never been able to peak the readings after tightening the bolts and no idea if the bent rim is impacting the signal.&nbsp; I've read about stringing the dish to check it, i'll do that tomorrow and post some pictures up.&nbsp; Shame I didn't take some readings when it was originally installed as a benchmark. Interesting, i've read some posts that the opposite was the case.&nbsp; That is going from the Triax to the Gibby was an improvement just because the bracket is so tricky to get right on the Triax.&nbsp; &nbsp; I know there isn't going to be much in it but when the weather is bad and the feed is cutting in and out, every little counts.&nbsp; What's the frequency for the test card on 3W?&nbsp; Keen to see if I get it now</blockquote>

[QUOTE="DonSE2, post: 1109325, member: 414325"] Yes what complicates it is the TD110 outer rim is bent when a loose shed door fell into it, from that point it's had a few other knocks when builders were in. The installer who did it originally but not currently working I suspect had it perfect but after the knocks it has been down to me to tweak it. I reckon i've done a pretty good job of it but i've never been able to peak the readings after tightening the bolts and no idea if the bent rim is impacting the signal. I've read about stringing the dish to check it, i'll do that tomorrow and post some pictures up. Shame I didn't take some readings when it was originally installed as a benchmark. Interesting, i've read some posts that the opposite was the case. That is going from the Triax to the Gibby was an improvement just because the bracket is so tricky to get right on the Triax. I know there isn't going to be much in it but when the weather is bad and the feed is cutting in and out, every little counts. What's the frequency for the test card on 3W? Keen to see if I get it now [/QUOTE]

Verification