Reply to thread

Message

<blockquote data-quote="Vipersan" data-source="post: 751579" data-attributes="member: 325666">Ok ..found the manual ..Here is an extract to show what I'm getting at &gt;&gt;&gt;&gt;&gt;&gt;B - TV scart settingsIn the MENU / Config / Video Output, you can adjust the video signal that comes out of theTV scart;On the line TV Mode, leave AUTO. You can, if you want, force the output to PAL or NTSC ifyour TV set has special requirements.On the line Screen mode, you must select the size of your TV set : 4:3 or 16:9. Attention,select 16:9 only if you have a widescreen TV. This setting is related to the TV set, not theprogram you’re watching.On the line Video Output, you can choose between CVBS or RGB. CVBS is universal modethat works with all TV sets, but RGB gives better picture. If you select RGB, the CVBS outputis disabled, so you can’t use, for example, a video sender on the video cinch (RCA) output.&gt;&gt;&gt;&gt;&gt;&gt;&gt;&gt;&gt;&gt;As you can see it is possible to set a scart output format which is non compliant with the requirements of the TV used ..If there is no step through function ..it is possible that the input format to the TV could be changed until a picture appears ..Things to try ...A different scart input on the TV ..as this may be configured differently ..The VCR out on the touchbox ...instead of the TV out ...connect this to your TV ..it may well be configured differently ..and a format which your TV can use..best of luckVS</blockquote>

[QUOTE="Vipersan, post: 751579, member: 325666"] Ok ..found the manual .. Here is an extract to show what I'm getting at >>>>>> B - TV scart settings In the MENU / Config / Video Output, you can adjust the video signal that comes out of the TV scart; On the line TV Mode, leave AUTO. You can, if you want, force the output to PAL or NTSC if your TV set has special requirements. On the line Screen mode, you must select the size of your TV set : 4:3 or 16:9. Attention, select 16:9 only if you have a widescreen TV. This setting is related to the TV set, not the program you’re watching. On the line Video Output, you can choose between CVBS or RGB. CVBS is universal mode that works with all TV sets, but RGB gives better picture. If you select RGB, the CVBS output is disabled, so you can’t use, for example, a video sender on the video cinch (RCA) output. >>>>>>>>>> As you can see it is possible to set a scart output format which is non compliant with the requirements of the TV used .. If there is no step through function ..it is possible that the input format to the TV could be changed until a picture appears .. Things to try ... A different scart input on the TV ..as this may be configured differently .. The VCR out on the touchbox ...instead of the TV out ... connect this to your TV ..it may well be configured differently ..and a format which your TV can use.. best of luck VS [/QUOTE]

Verification