Advice Needed Receivers with the lowest Symbol Rate?

[scopus]

is there a chance the feed wasnt live at the time, or did you run the scans at the same time....which is quicker.

Ran at the same time

 

[scopus]

I have 8 receivers and they all behave differently and find a varying amount of channels with blind scan. The one that seems to find the most is the SF8008 with the SX88 firmware. I don't think with that firmware though, it will scan below a 1000 maybe 1500 on symbol rates but the DM900 does.. Horses for courses..

 

[Manikm909]

I have 8 receivers and they all behave differently and find a varying amount of channels with blind scan. The one that seems to find the most is the SF8008 with the SX88 firmware. I don't think with that firmware though, it will scan below a 1000 maybe 1500 on symbol rates but the DM900 does.. Horses for courses..

do you actually have an sx88 to compare it with the sx88 image in slot

 

[frankviana]

I have 8 receivers and they all behave differently and find a varying amount of channels with blind scan. The one that seems to find the most is the SF8008 with the SX88 firmware. I don't think with that firmware though, it will scan below a 1000 maybe 1500 on symbol rates but the DM900 does.. Horses for courses..

Hi friend. I have sx88 and sx88+. Do you know if sf8008 accepts (manually input) SR below 1000 and max 80.000? Or only 1000 and 60.000?

And how about blindscan sf8008? (Defined OS and Enigma2) 1 ~60 too? Acoording support, sf8008 find 100 ~ 80.000

I have h9, h9 twin, zero4k and, appear only 1 to 60 (OpenATV).

Using blindscan, h9/h9twin/zero4k find only 1 ~ 45.

Sx88/SX88+ find 1 ~ 47500.

 

[frankviana]

I need good receiver to do "C blindscan". H9s/twin show wrong ranges for C band. Work only Ku band.

See here my tests h9s. This week I'm testing my new h9 twin, but same wrong C blindscan.

Blindscan "C band" Zgemma h9s · Issue #85 · zgemma-star/meta-zgemma

Hi. We have a problem using dmm binary for blindscan. It's necessary new bin file. Here, a lot of problems related, then, I have some logs: For more details, see this post: https://forums.openpli.o...

github.com

I'm watching a lot of videos about: Edision Os Mio 4k/4k+, SF8008, Amiko Viper 4k and Ustym 4k pro for good "C blindscan", but I don't know if support symbol rates 0 ~ 80, 0 ~ 60, 1 ~ 60, 1 ~ 80, 0 ~ 45 or 1 ~ 45.

I don't know if sf8008 accept only manual scan 100 ~ 80.000 acording support.

Sorry my english.

 

[scopus]

Hi friend. I have sx88 and sx88+. Do you know if sf8008 accepts (manually input) SR below 1000 and max 80.000? Or only 1000 and 60.000?

And how about blindscan sf8008? (Defined OS and Enigma2) 1 ~60 too? Acoording support, sf8008 find 100 ~ 80.000

I have h9, h9 twin, zero4k and, appear only 1 to 60 (OpenATV).

Using blindscan, h9/h9twin/zero4k find only 1 ~ 45.

Sx88/SX88+ find 1 ~ 47500.

Yes it certainly does..here is some radio stations off 23E it downloads with a manual..Not sure of the upper limit..

 

[Channel Hopper]

-7 degrees here tomorrow as well.

 

[jeallen01]

-7 degrees here tomorrow as well.

Wrong thread - should have been in "Batten down the hatches,......"!

 

[Manikm909]

Yes it certainly does..here is some radio stations off 23E it downloads with a manual..Not sure of the upper limit..View attachment 134508

@Channel Hopper said that 940 SR - might just be an approximation of the 1000 SR lower limit, which is a fair point.
we need something in the 200 - 800 range to be sure....im happy to test if someone could point me to a lower SR TP

 

[ozumo]

5 west 11458H 542 & 11465H 667

 

[Manikm909]

5 west 11458H 542 & 11465H 667

coming in loud (Octagon SF8008) and clear at 16.5db, its a shame the blind scan doesnt go lower than 1000 in E2

 

[ozumo]

16 east 11078H 176

 

[Manikm909]

neither my SF8008 (E2) - nor my SX88 (non E2) can lock that one mate - not sure if its just a signal issue or an low SR issue

 

[moonbase]

The TBS6903 DVB card can blind scan in very low SR.
I have attached a spectrum and transponder list below from a blind scan of 16E.
The blind scan locked the frequency of 21,563 with SR of 128.

.

 

[Manikm909]

Does anyone know if there are any receivers that can do Symbol rates in kS/s ranges below 1000,
I know that some PCI cards can do it, but are there any receivers that are able to go really low in the 100's range

there are two scenarios here:
a) Which STB's can manually handle lower than 1000SR TP's (i.e manually input)
b) Which STB's FIND lower than 1000SR TP's on a blindscan.

 

[frankviana]

there are two scenarios here:
a) Which STB's can manually handle lower than 1000SR TP's (i.e manually input)
b) Which STB's FIND lower than 1000SR TP's on a blindscan.

If I remember, PurE2 or SatdreamGR blindscan start search: 00 and end search: 60. OpenATV start search 01 to 60 only.

 

[frankviana]

The TBS6903 DVB card can blind scan in very low SR.
I have attached a spectrum and transponder list below from a blind scan of 16E.
The blind scan locked the frequency of 21,563 with SR of 128.

.
View attachment 134510

View attachment 134511

Here in Brazil, we don't have Frequency start 21000.

Ka band?

 

[moonbase]

Here in Brazil, we don't have Frequency start 21000.

Ka band?

Yes, Ka-Band from 16.0E

 

[Manikm909]

If I remember, PurE2 or SatdreamGR blindscan start search: 00 and end search: 60. OpenATV start search 01 to 60 only.

interesting, so different images use different blindscan plugins! never knew that

 

[frankviana]

interesting, so different images use different blindscan plugins! never knew that

Yes, different python code (00 ~ 60 or 01 ~ 60) and same binary to scan...

My Vu+ Zero 4k, own blindscan binary (vuplus bindscan) and save to .xml

Zgemma h9s/twin, (dmm blindscan binary outdated) and only work Ku Band...