Chr0nik's latest activity
-
Chr0nik replied to the thread Wanted C120 lnb and freehorn.That is already good. It's pretty weird because on the meter that I use to allign the dish (SatLink WS-6933), I get around 14.9db but on... -
Chr0nik replied to the thread Wanted C120 lnb and freehorn.The dish was pretty damaged so it's in storage now but on the 120cm Channel Master, I get around 16.23db tops with an Inverto Black...
-
I'm in the same area, anything from a Zone 2 Sky dish for 12654V (Kuban has left, only radio now) up to a 1.5m for 12674V & 12694V. A...
-
Chr0nik replied to the thread 55E (Yamal 402).I'm using a Channel Master 120cm
-
Chr0nik replied to the thread 55E (Yamal 402).I'm using an Edision OS Mini 4K. I think it does
-
Chr0nik replied to the thread 55E (Yamal 402).I'm now able to get all of the Northern transponders from this sat - most of them at around 7.9db but pixelated but can get TB41 and U+2...
-
-
Then you can move the dish, albeit slowly. Disconnect the outside cable from the sensor ports and replace with two short bits of wire...
-
Chr0nik replied to the thread Actuator/Reed sensor issue.It does move but only a bit and then it stops each time. I've tried to test the "faulty" one on the other motor that I have and it does...
-
Yes, should be okay :)
-
Chr0nik posted the thread Actuator/Reed sensor issue in DISH SETUP: Single sat, Multi-Sat & Motorised.Hi, A couple of weeks ago, the reed sensor of the Geotrack actuator I've been using went t*ts up and isn't working anymore and I...
-
Chr0nik reacted to william-1's post in the thread Just Sharing This Strongest transponders with
Like.
The Strongest transponders for January 4th 2021 All active Ku band satellites from 50° east to 45° west This list was compiled by... -
Chr0nik replied to the thread Continous stream data on telstar 11n @ 37.5° west.What's the dish size needed to be able to catch something on this sat? would a 120cm dish cut it?
-
Chr0nik replied to the thread TM-5500 dapci remote control wanted.I've sent them an email asking for the code but also seen some remotes being sold on ebay that claim to support the box but I'm not...
-
Probably better to ask the "manufacturer" of the "universal" R/C! TM "tech support" "sucks" - and has done for nearly 2 decades in my...
-
Hi, Does anybody have a tm-5500 dapci remote control they may no longer need? I recently purchased one without one to make use of the...
