Recent content by dreambox1959

  1. dreambox1959

    EGIS motor

    I designed this small assembly so that an old LNB (9.75/10.75 -14/18V) + mechanical polarotor can be recognized by the sf8008 as a universal LNB with OL 9.75/10.75 instead of 9.75/10.6. It works very well, you have to adjust the two polar values at each satellite position. here is the...
  2. dreambox1959

    EGIS motor

    Are there people who use a mechanical polarotor? in KU band? Which LNB: OL=9.75-10.75 band select 14/18V or OL 9.75-10.6 band select 22khz? On my EGIS installation I am going to put a mechanical polarotor and a 9.75/10.75 LNB and I am going to add a small interface to control this LNB with...
  3. dreambox1959

    EGIS motor

    i have to make some adapters to use an old LNB : i set the sf8008 as universal lnb (tone for band select) . i juste change the OL values . i want to keep 14/18V as polar change . i detect 22k to change power supply for old lnb . i keep 14/18 to change polarotor value . to make some test...
  4. dreambox1959

    EGIS motor

    i get it this afternoon thanks
  5. dreambox1959

    EGIS motor

    no ! no sticker no model name , it s second hand equipment taken out of the attic .
  6. dreambox1959

    EGIS motor

    I had the opportunity to buy a 140 cm prime focus, I made an adaptation to mount it on the EGIS engine. The particularity of this AZ-EL motor is that the number of pulses is proportional to the displacement (100 pulses in AZ - 400 pulses in EL). I can therefore calculate with great precision...
  7. dreambox1959

    EGIS motor

    so 30+12 pounds ! if the LNB from TRUST was faulty i come back to you ( those LNB are new from 80S !!!)
  8. dreambox1959

    EGIS motor

    yes , of course ! i ll send you postage price on paypal. JP
  9. dreambox1959

    EGIS motor

    this kind of lnb had 9750 and 10750 mhz as local oscillator to switch band it s 14/18V . i drawn a special card to manage this . for me wide band and full band is equal . now the upper LO is 10600 but for me it s ok .
  10. dreambox1959

    EGIS motor

    71800 burgondy /bourgogne france
  11. dreambox1959

    EGIS motor

    i had sent some electronics pieces in UK , export sheet is simple , just put "old spares" . taxes are for a full set like TV or audio unit etc . delivery price has increase also .. thanks to boris !!!! trust: i use my EGIS to improve my positioner program and i have found an 1.20m...
  12. dreambox1959

    EGIS motor

    thanks riman i have those lnb too , i m looking for wide band ku .
  13. dreambox1959

    EGIS motor

    can i have a friendly price ? and a packet for france ?
  14. dreambox1959

    EGIS motor

    Does anyone have an old LNB: dual band (9.75/10.6 or 9.75/10.75) single polarization, to associate with a mechanical polarotor? I need it to carry out tests on an EGIS mount. no need for a high-performance model (norsat) but rather an antique from the 2000s.
  15. dreambox1959

    EGIS motor

    The EGIS motor has a contact which detects the “0” or origin position on the AZ motor and on the EL motor. My program uses these positions to initialize the AZ and EL counters. If we wish to have 9000 due south and 14000 at maximum elevation due south, a value must be added to the AZ and EL...
Top