Recent content by garga pista

If it's turly a Pace Prima (Prima by Pace), these could be useful: (There was 2 verions from the Prima, the VC2 verison had all scart sockets (and the decoder inside), but as far as i know there was a version without decoder and some scart connector/s) Pace MSS100 Prima satellite receiver FAQ...

Dear members, I've bought this receiver at a local autcion site and looking for any infos - user or service manual. I'll use the reciver as a positioner for a dish. First of all, i'll look through the PSU, check the everything works fine, and a manual would be very helpful. The reciver looks...

Just sharing some info about a repair of a dead SR8700. First, all electrolytic caps at the secondary changed. After that, the psu looked like working, but i couldn't measure all voltages on the connector (with the cable connected to the main board). And then with moving the connector I found...

I'm opening this tread here, because this motor relates more to the analog era. I'm looking for some information about this motor, there were 2 types produced. In the Nokia receiver's settings you can choose between type1 or type2. I found some information about it on this site, this is...

Nothing about the specs. The card goes straight into the receiver integrated D2MAC card reader (it has 2 slots). So i think it has the same connectors as the standard viewing card. The only information, where i got the picture is this archive site: link Text with google translate: Memory Card...

I'm looking for a Nokia memory card, which is suitable for the Nokia Sat 8001, 8003 receivers storing and moving channels, settings: If anyone has one, pls. send me a message. I think it's quite rare, couldn't find much information about it, just an archive site.

Thanks for the reply, first i tried blind the factory reset, it did not help. Then i removed the 2 decoder boards- still nothing. I couldn't find the service manual, but looked for the chip datasheets from the main board. And bingo! The STV0030 switches between AV,decoder, etc and inserts OSD...

Hello! I'm trying to repair an LT-8700 receiver, looking for a schematic or service manual, or just an advise. It works "halfway". The receiver boots up, front panel display and remote works, but no picture output. No picture, nor OSD on the TV scart, RCA plug, or on the modulator. The receiver...

I've got some news about the project: If I'm feeding the singal to to the C217 next to the Nicky3 chip, the receiver thinks it comes from the tuner, so i can get a good picutre. I'm trying to get another input, via the decoder selector switch U21 (4052). I'm feeding the signal into the U21...

I got some thought about making a scart switch (with remote!) from one of my analouge receivers. The selceted one is a Pace MSS200 series. The first level is easy, switching between 2 devices: Using the VCR input with the standard scart switch signal (when turned on the external device, the...

So I've got a last question, about something else. I've got some switches laying orund: 12V, 22Kz and magn.polarizer controlled. I've got 2 old receivers: Pace MSS 200 series and a Pace Prima (both multichoice version). Can I use the magn.polarizer controlled switch with these receivers? Thes...

Thanx for the answer. And from the topic I have another question. Someone mentioned the 10GHz ATV receiveing, I've read about it seweral things, but it's not clear for me, where can I found those stations? Could I receive some ATV signal in hungary?

Recently I did we did some cleanup, and give away a lots of analouge recivers (for demolition). I've kept some receivers (Pace Prima, MSS 200 Series), and 2 Videocrypt decoders (Nordmende Vc500 and Thomson Multichoice). I've opened the Thomson decoder, and found some interesting thing. There is...

It would be nice if it would remain a few channels, so use the receivers as a radio, or to set up astra easily.

All channles + radios _http://www.youtube.com/watch?v=l61VjqvPvV8 Live External Link disabled iaw Forum Rules