The "E2" message means the VBOX is trying to drive the motor but doesn't receive any pulses. A couple of reasons for this could be:
- You have reached a limit switch
- Motor cabling is not working properly
- Sensor cabling is not working properly
- The sensor is too far away from the magnetic...
Raindrops and snow will not accumulate so easily on the black plastic cover. Furthermore any water or snow that resists falling off it will be away from the phase center of the horn and should degrade reception less than if it was just on front of the horn as with the membrane version. The black...
The UK Zee Network channels can be legally subbed from anywhere in Europe as long as you can receive them. No need for BskyB brokers.
On top of that, the BskyB brokers usually only offer the four standard UK or Irish Sky subs as far as I have seen...
In my case the Invacom is better on Horizontal transponders and the Inverto is better on Verticals.
There seems to be one possible reason for this:
-The back probe in the Invacom is Horizontal
-The back probe in the Inverto is Vertical
Back probes have a 100% closed wall behind them whereas...
Option two is really only needed if the receiver cannot be configured for a LOF of 5150MHz. The C vs. fake Ku band frequency math only fools the tuner to tune the right IF frequency with a Ku-band frequency input. C and Ku band only exist in the LNB, the same downconverted frequency band is used...
Set the LO frequency for the corresponding lnb to 5150MHz
You may need to tag the "INV" option if you try to do a manual transponder scan.
My DM500S is a bit tricky to get going on C-band, perhaps since IF frequency is calculated inversely (LO is higher than received frequency).
This next...
Why not D/L some skins directly from the DM-500 addon server using the blue-button menu? That is safe and very easy.
The Generation-skins you find there are very nice in my opinion
Yes, I'm sure at least 15 more phone-s_x promo channels with semi-lousy picture quality will fit in there nicely...
On the other hand a couple of nice HD-channels could fill each shutdown analog transponder void too.
Guess we will soon know, my point was that quantity isn't always a...
Sad news indeed, but still available in C-band on Badr-C for the die-hard analog enthusiast. I can't get it there because my analog tuner can't handle the inverse video used on C-band but perhaps others are luckier. Badr-C is very strong here and a 120cm prime focus dish is enough to pick it up.
If you buy an angled MTI LNB (many other possible brands too) and split up the plastic housing (don't touch the white protective cap) you will have a cast-aluminium LNB with 23mm neck. Works fine!
Karism, what is that "little meter" you are talking about?
A so called satfinder that you put inline in the LNB to receiver cable run or something more elaborate?
Karis, with those signal levels I assume you are measuring signal levels on the IF (LNB output). Again this is really telling you nothing about reception quality, just how much total gain the LNB has which isn't the same at all. You need to measure carrier to noise (C/N) or signal to noise (S/N)...
Yep, it is a steady 3dB weaker than most other Badr-4 transponders here, i need a 2.4m dish to get it. The normal Badr-4 TP's were receivable with 1.8m. Possibly they just run the MBC transponder on reduced output, who knows?
And for Nilesat 7W: I get the MBC's 24/7 with a 1.2m prime focus so...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.