Recent content by macx

That should read F16. macx.

The Irish outlet is showing the F15 on their site, I have tried several times to buy one but there seems to be a problem with their payment system, I spoke with their office in Ireland waste off time, have settled for a Spiderbox HD9900 instead. macx.

Thanks for the info re Scart to Component, can it and what is needed to connect to a moteck box. macx.

Thanks for the info.

Thanks satsecure for that info, here is a diagram of my setup and the rear view of the d15 can you indicate how to connect using a scart to component as suggested. macx.

Hi, Have read the various comments regarding the D15, can you tell me as there is no scart how I would connect it to my existing units, Panasonic TH-42PZ70B TV, TM 6902HD receiver, and a Panasonic DMR-EX78EB DVD recorder. thanks macx.

will do thanks. macx

I am thinking of getting a Dr HD D15 receiver do any members have one and recommend it or maybe an alternative. macx.

Having established that the LNB is not faulty I mounted same to the side of the existing as shown elsewhere on the forum. With the dielectric plate inserted in the different positions and slowly turning the LNB full circle and then again without the plate. The LNB was also slowly moved slowly to...

I have resumed trying to get some results, and it seems that the LNB is not faulty and I need to be a tad more patience. macx.

Both ok here in Conlig. macx.

Hi, have a drive to Bangor. Staks Unit 7, Dunlop Industrial Estate 8, Balloo Drive, Bangor, Tel: 028 9146 9136 www.staks.org.uk macx.

Thanks everyone for your advice, I am waiting fro a reply from two suppliers for prices to send an ESX 421 to Northern Ireland, have tried a few UK suppliers who advertise these LNB’s but they are either out of stock or are I think far to expensive. macx.

Hi, Yes I have tried everything and as Costactc suggested the LNBF must be faulty, so maybe members could suggest a suitable replacement. I have tried several times to reply to nelson_b and got the following “An error occurred with the SQL server” but after a short period things returned to...

Hi, In the past I have removed the rust areas, and given a good wire brushing followed with a few coats of Hammerite. macx.