Henrik Andersen
Member
- Joined
- Feb 22, 2019
- Messages
- 22
- Reaction score
- 2
- Points
- 3
- Age
- 59
- My Satellite Setup
- 90 cm dish, Stab HH90 motor, Zgemma H9S
- My Location
- Denmark
Hi All
I have registered because I really need expert help. I hope to find it here.
I have just bought the Zgemma H9S, and installed OpenAtv v. 6.3 on it. (of course it not nice to read the forum that Zgemma is a load of crap, but nevertheless it is the one I bought).
I used to have the GT Media OTC, but I was not happy with it, but it did actually move the motor (Stab HH90) .... sometimes ....
I was recommended to buy the VU+ Zero, but I think the Zgemma H9S has better specs.
Here is my problem:
I have configured the tuner as :
Simple
Positions (chosen 4 satellites)
and put in my home lat and lon
From here I go to Manual Search
I choose the Astra on 19.2E to search for channels.
I now expect the motor to turn to the given position for the satellite (using my position as base), but the motor only moves approx. 1 degree clockwise and hereafter going back to 0 position. And then stops.
The exact same thing happens if I try to watch a channels on Astra.
If I go to the Motor Setup page, then absolutely NOTHING happens when I try to manually turn the motor. And nothing happens when I use the "GOTOX" function to turn to a pre-installed satellite position in the Stab motor.
I am lost .. I have been all over the Internet and found nothing that helped. I know how to setup the motor and configure from other receivers, but here I am lost.
Can anyone help me get the motor to work with this receiver ?
Thanks
//Henrik
I have registered because I really need expert help. I hope to find it here.
I have just bought the Zgemma H9S, and installed OpenAtv v. 6.3 on it. (of course it not nice to read the forum that Zgemma is a load of crap, but nevertheless it is the one I bought).
I used to have the GT Media OTC, but I was not happy with it, but it did actually move the motor (Stab HH90) .... sometimes ....
I was recommended to buy the VU+ Zero, but I think the Zgemma H9S has better specs.
Here is my problem:
I have configured the tuner as :
Simple
Positions (chosen 4 satellites)
and put in my home lat and lon
From here I go to Manual Search
I choose the Astra on 19.2E to search for channels.
I now expect the motor to turn to the given position for the satellite (using my position as base), but the motor only moves approx. 1 degree clockwise and hereafter going back to 0 position. And then stops.
The exact same thing happens if I try to watch a channels on Astra.
If I go to the Motor Setup page, then absolutely NOTHING happens when I try to manually turn the motor. And nothing happens when I use the "GOTOX" function to turn to a pre-installed satellite position in the Stab motor.
I am lost .. I have been all over the Internet and found nothing that helped. I know how to setup the motor and configure from other receivers, but here I am lost.
Can anyone help me get the motor to work with this receiver ?
Thanks
//Henrik