retunerman
New Member
- Joined
- Jul 22, 2023
- Messages
- 4
- Reaction score
- 0
- Points
- 1
- Age
- 64
- My Satellite Setup
- Philips STU902 / Technomate 6902
- My Location
- United Kingdom
Could anyone help me with some advice on this Ferguson SRB1 error code please?
The code (or garbage) appears the moment the receiver is powered up, there's no delay at all. All the buttons and the setup key on the rear are compeletely unresponsive and on the channel number display I get three horizontal lines (above each other) followed by the number 2 which alternates with the -- standby indicator.
I've had a look through the service manual and can find no reference to this or any other error codes, so I'm guessing it's probably kaput.
Any help would be gratefully received. I'm a newbie here and I've enjoyed reading a lot of the posts on this forum.
Many thanks
The code (or garbage) appears the moment the receiver is powered up, there's no delay at all. All the buttons and the setup key on the rear are compeletely unresponsive and on the channel number display I get three horizontal lines (above each other) followed by the number 2 which alternates with the -- standby indicator.
I've had a look through the service manual and can find no reference to this or any other error codes, so I'm guessing it's probably kaput.
Any help would be gratefully received. I'm a newbie here and I've enjoyed reading a lot of the posts on this forum.
Many thanks