28.2°e 11.970V 27500 Auto

[skomedal]

Its a miracle

Regards

 

[scopus]

OK this is what I get on 11.977V off BADR Press TV etc.
No signal at all on 11.970V on 28E here and that is on a 1.8 Channel Master

 

[Analoguesat]

Badr 4 used to be an exceptionally easy catch up here on an 80 cm dish - I used to get a dozen or so tp's no problem at all.

This was one of my infamous salvage dishes - a bent one which Id straightened out so it wasnt pristine by any stretch of the imagination.

 

[Archive4]

Can you guys check 11973V on Astra 28.2 to see if out is there?

 

[Analoguesat]

Can you guys check 11973V on Astra 28.2 to see if out is there?

Its been off air for months - it was a Sky DVB-S2 tp until fairly recently. Nothing there now:

 

[Archive4]

Guess that sums it up, the ghost of xmas just passed, or a very special stb and zone 1 dish

Edit. Just checked on 1.2 and 1.8, nowt there at all.
Ghost wins, unless statalite can still see it, then we need an exorcist

 

[statalite]

Guess that sums it up, the ghost of xmas just passed, or a very special stb and zone 1 dish

Edit. Just checked on 1.2 and 1.8, nowt there at all.
Ghost wins, unless statalite can still see it, then we need an exorcist

I will do a factory reset and blind scan later to see if it comes back.

 

[scopus]

Can you guys check 11973V on Astra 28.2 to see if out is there?

Already tried, No Signal

 

[Archive4]

Already tried, No Signal

Thanks, but late on parade, until now the ghost wins!

 

[scopus]

I think the box Statalite is using is a a Dr HD D15, but don't they suffer from some sort of database errors when doing blind scan, throwing ghost transponders up? William 1 has mentioned this before.

 

[Archive4]

I think the box Statalite is using is a a Dr HD D15, but don't they suffer from some sort of database errors when doing blind scan, throwing ghost transponders up? William 1 has mentioned this before.

Without a doubt the box is mis-reading the signal parameters. But how can a zone 1 dish see that signal in the first place?

 

[statalite]

Did a scan last night and this morning, it hasn't returned, a phantom in the system.

 

[AndyX]

I think the box Statalite is using is a a Dr HD D15, but don't they suffer from some sort of database errors when doing blind scan, throwing ghost transponders up? William 1 has mentioned this before.

Unfortunately they do. I have one and it is a major bug bare.