ched999uk
Regular Member
- Joined
- Feb 7, 2014
- Messages
- 55
- Reaction score
- 32
- Points
- 18
- Age
- 54
- My Satellite Setup
- zone 1 sky type dish with quad lnb @28.2e, zone 2 sky dish with octo lnb @ 19.2e and Humax Foxsat HDR
- My Location
- Sunny Blackpool
First off thanks for all the info that is here. I only wish I found it earlier
I am in Blackpool so northish, I am mainly interested in watching the F1 this year.
So after reading lots of sites decided I needed a dish pointing to 19.2E. So I ordered a zone 2 sky type mesh dish with quad lnb, a Inverto Multi-LNB Holder as I had a new quad lnb and a 4 way DiSEqC switch.
I intend to mount the new zone 2 dish with the 2 quad lnb's aiming centre lnb at 19.2E and other lnb at 16E. Then connect a feed of each plus my other dish (28.3E) into the DiSEqC swich and then a single cable to my Humax Foxsat HDR (which will have lnb 2 connected to the 28.2E dish 2nd output from it's quad lnb).
So my question is does the above seem reasonable or should I have done it a different way?
Thanks for any help you can give.
I am in Blackpool so northish, I am mainly interested in watching the F1 this year.
So after reading lots of sites decided I needed a dish pointing to 19.2E. So I ordered a zone 2 sky type mesh dish with quad lnb, a Inverto Multi-LNB Holder as I had a new quad lnb and a 4 way DiSEqC switch.
I intend to mount the new zone 2 dish with the 2 quad lnb's aiming centre lnb at 19.2E and other lnb at 16E. Then connect a feed of each plus my other dish (28.3E) into the DiSEqC swich and then a single cable to my Humax Foxsat HDR (which will have lnb 2 connected to the 28.2E dish 2nd output from it's quad lnb).
So my question is does the above seem reasonable or should I have done it a different way?
Thanks for any help you can give.