nelson_b
Contributor
- Joined
- Jul 27, 2008
- Messages
- 1,970
- Reaction score
- 2,039
- Points
- 113
- Age
- 74
- My Satellite Setup
- Strong 4375 driving a 2.4 m Channel Master dual focus offset + Invcom Quad C120 K/U l.n.b. + BSC 421 and Zinwell C band l.n.b.,s - DR HD F15 - TM5302 - Octagon SX88+Optima - GT Media V7 - HD receivers. + other dishes currently in use - Antique 3.0 m Prodelin P.F. - Channel Master 1.8 m offset - Channel Master. 1.2 m.
- My Location
- North West Yorkshire - near Lancashire & Cumbria borders.
Not sure what is causing this to occur ? but it has but it has become much worse this past year .. i,m thinking of scraping and lightly sanding the affected areas then sealing the whole dish face with F - Glass resin ... can anyone suggest something to stabilize the affected areas prior to sealing and repainting ?
Some pics below ... Pics 4 and 5 show close up where i have scraped and sanded deeper to see if the mesh is still intact .. and it appears to be undamaged - or at least unbroken ... and its just the surface / covering layer that is breaking up ?
I welcome any suggestions ....
Some pics below ... Pics 4 and 5 show close up where i have scraped and sanded deeper to see if the mesh is still intact .. and it appears to be undamaged - or at least unbroken ... and its just the surface / covering layer that is breaking up ?
I welcome any suggestions ....